Loose Mineral Foundation Shaker Jar

Step 1- Open the Jar
Using pin, open three to five holes in sifter label. DO NOT remove sifter label. If you do remove the sifter label, too much will be released and product will be unnecessarily wasted.

Step 2- Release the Minerals
Once the holes have been opened, replace the lid and turn the container upside down. Tap the container in the palm of your hand or on a hard surface three to five times. This will release minerals into the lid. With the container remaining lid side down, open jar and set both lid and the base of the jar down.

Step 3- Load the Brush
Take a Kabuki or Deluxe brush and dip it into the lid with the loose minerals. Load the minerals onto the brush until they have been absorbed. 

Step 4- Apply the Minerals
Press the minerals onto the skin by working in small circular motions all over the face. Application needs to be firm.
For light coverage repeat this process 1-2 times.
For medium to heavy coverage repeat this process 3-5 times.